Cumbria AutoDetailing

For this latest detail the customer not only new exactly how he wanted his car to look, but he also knew through past experience exactly which products he wanted us to use.

We were asked by the client to give the vehicle a full paint correction detail , and protect the vehicle internally/externally with a comprehensive gtechniq range of products

The vehicle in question was an Alfa Romeo Giulietta which to be truly honest was already kept in impeccable order by the client.

 

The car before the paint correction detail

As to all our details the job started with a full ph neutral wash and plush towel dry, followed by a full clay bar decontamination then full sun gun and paint depth inspection,This then gave us an overall idea what was needed to start the paint correction.

SCRATCHES ON THE FRONT BUMPER

We used our festool shinex rotary polisher to start on the cut stage,whilst using several variations of lake country pads and meguires compounds to remove as many deep swirls/scratches etc,

The rear panel  was corrected and the passenger side door shows the defects which typically covered the vehicle

50/50 REMOVING DEFECTS

After a lot of ipa cleansing and testing the paint depth we finally finished the defect removal stage to the highest possible standards achievable, Next up was the paint refining process to remove the buffer trails/surface hologram's,this stage was completed using a combination of our rotary polisher and finished withour rupes bigfoot DA the total hours taken from cut to finish took approx 40 hours.

GTECHNIQ PROTECTION

One final inspection then we were onto the protection procedures! Up first was the Gtechniq C1  which was left for 3 hours before we could apply the second form of protection which was the super hydrophobic Gtechniq Exo , Next up was the Gtechniq C5 wheel armour after these three procedures were completed the car was left for 12 hours to cure correctly.

ON OUR RAMP FOR THE WHEEL REMOVAL

We were back in the workshop the next day to carry on finishing the detail which comprised of a full gtechniq interior protection, then internal external windows with rain repellants fitted, and finally the exhaust and tyres

The completed job took just over 5 days  and the end results were simply stunning!
The finshed pics below.